David Keith

David Keith and Peter Irvine. 3/20/2020. “Halving warming with stratospheric aerosol geoengineering moderates policy-relevant climate hazards.” Environmental Research Letters, 15, 4. Publisher's VersionAbstract
Stratospheric aerosol geoengineering is a proposal to artificially thicken the layer of reflective aerosols in the stratosphere and it is hoped that this may offer a means of reducing average climate changes. However, previous work has shown that it could not perfectly offset the effects of climate change and there is a concern that it may worsen climate impacts in some regions. One approach to evaluating this concern is to test whether the absolute magnitude of climate change at each location is significantly increased (exacerbated) or decreased (moderated)relative to the period just preceding deployment. In prior work it was found that halving warming with an idealized solar constant reduction would substantially reduce climate change overall, exacerbating change in a small fraction of places. Here, we test if this result holds for a more realistic representation of stratospheric aerosol geoengineering using the data from the geoengineering large ensemble (GLENS). Using a linearized scaling of GLENS we find that halving warming with stratospheric aerosols moderates important climate hazards in almost all regions. Only 1.3% of land area sees exacerbation of change in water availability, and regions that are exacerbated see wetting not drying contradicting the common assumption that solar geoengineering leads to drying in general. These results suggest that halving warming with stratospheric aerosol geoengineering could potentially reduce key climate hazards substantially while avoiding some problems associated with fully offsetting warming.
Nicholas J. Lutsko, Jacob T Seeley, and David W. Keith. 5/2020. “Estimating Impacts and Trade‐offs in Solar Geoengineering Scenarios With a Moist Energy Balance Model.” Geophysical Research Letters, 47, 9.Abstract
There are large uncertainties in the potential impacts of solar radiation modification (SRM) and in how these impacts depend on the way SRM is deployed. One open question concerns trade‐offs between latitudinal profiles of insolation reduction and climate response. Here, a moist energy balance model is used to evaluate several SRM proposals, providing fundamental insight into how the insolation reduction profile affects the climate response. The optimal SRM profile is found to depend on the intensity of the intervention, as the most effective profile for moderate SRM focuses the reduction at high latitudes, whereas the most effective profile for strong SRM is tropically amplified. The effectiveness of SRM is also shown to depend on when it is applied, an important factor to consider when designing SRM proposals. Using an energy balance model allows us to provide physical explanations for these results while also suggesting future avenues of research with comprehensive climate models.
David Keith and Joshua Horton. 4/23/2019. “Multilateral parametric climate risk insurance: a tool to facilitate agreement about deployment of solar geoengineering?” Climate Policy. Publisher's VersionAbstract
States will disagree about deployment of solar geoengineering, technologies that would reflect a small portion of incoming sunlight to reduce risks of climate change, and most disagreements will be grounded in conflicting interests. States that object to deployment will have many options to oppose it, so states favouring deployment will have a powerful incentive to meet their objections. Objections rooted in opposition to the anticipated unequal consequences of deployment may be met through compensation, yet climate policy is inhospitable to compensation via liability. We propose that multilateral parametric climate risk insurance might be a useful tool to facilitate agreement on solar geoengineering deployment. With parametric insurance, predetermined payouts are triggered when climate indices deviate from set ranges. We suggest that states favouring deployment could underwrite reduced-rate parametric climate insurance. This mechanism would be particularly suited to resolving disagreements based on divergent judgments about the outcomes of proposed implementation. This would be especially relevant in cases where disagreements are rooted in varying levels of trust in climate model predictions of solar geoengineering effectiveness and risks. Negotiations over the pricing and terms of a parametric risk pool would make divergent judgments explicit and quantitative. Reduced-rate insurance would provide a way for states that favour implementation to demonstrate their confidence in solar geoengineering by underwriting risk transfer and ensuring compensation without the need for attribution. This would offer a powerful incentive for states opposing implementation to moderate their opposition.
Peter Irvine, Kerry Emanuel, Jie He, Larry Horowitz, Gabriel Vecchi, and David Keith. 3/11/2019. “Halving warming with idealized solar geoengineering moderates key climate hazards.” Nature Climate Change. Publisher's VersionAbstract

Solar geoengineering (SG) has the potential to restore average surface temperatures by increasing planetary albedo, but this could reduce precipitation. Thus, although SG might reduce globally aggregated risks, it may increase climate risks for some regions. Here, using the high-resolution forecast-oriented low ocean resolution (HiFLOR) model—which resolves tropical cyclones and has an improved representation of present-day precipitation extremes—alongside 12 models from the Geoengineering Model Intercomparison Project (GeoMIP), we analyse the fraction of locations that see their local climate change exacerbated or moderated by SG. Rather than restoring temperatures, we assume that SG is applied to halve the warming produced by doubling CO2 (half-SG). In HiFLOR, half-SG offsets most of the CO2-induced increase of simulated tropical cyclone intensity. Moreover, none of temperature, water availability, extreme temperature or extreme precipitation are exacerbated under half-SG when averaged over any Intergovernmental Panel on Climate Change (IPCC) Special Report on Extremes (SREX) region. Indeed, for both extreme precipitation and water availability, less than 0.4% of the ice-free land surface sees exacerbation. Thus, while concerns about the inequality of solar geoengineering impacts are appropriate, the quantitative extent of inequality may be overstated.


Lee Miller and David Keith. 10/4/2018. “Observation-based solar and wind power capacity factors and powerdensities.” Environmental Research Letters, 13. Publisher's VersionAbstract

Power density is the rate of energy generation per unit of land surface area occupied by an energy system. The power density of low-carbon energy sources will play an important role in mediating the environmental consequences of energy system decarbonization as the world transitions away from high power-density fossil fuels. All else equal, lower power densities mean larger land and environmental footprints. The power density of solar and wind power remain surprisingly uncertain: estimates of realizable generation rates per unit area for wind and solar power span 0.3–47Wem−2 and 10–120Wem−2 respectively. We refine this range using US data from 1990–2016. We estimate wind power density from primary data, and solar power density from primary plant-level data and prior datasets on capacity density. The mean power density of 411 onshore wind power plants in 2016 was 0.50Wem−2. Wind plants with the largest areas have the lowest power densities. Wind power capacity factors are increasing, but that increase is associated with a decrease in capacity densities, so power densities are stable or declining. If wind power expands away from the best locations and the areas of wind power plants keep increasing, it seems likely that wind’s power density will decrease as total wind generation increases. The mean 2016 power density of 1150 solar power plants was 5.4Wem−2. Solar capacity factors and (likely) power densities are increasing with time driven, in part, by improved panel efficiencies. Wind power has a 10-fold lower power density than solar, but wind power installations directly occupy much less of the land within their boundaries. The environmental and social consequences of these divergent land occupancy patterns need further study.

Lee Miller and David Keith. 10/4/2018. “Climatic Impacts of Wind Power.” Joule, 2. Publisher's VersionAbstract

We find that generating today’s US electricity demand (0.5 TWe) with wind power would warm Continental US surface temperatures by 0.24C. Warming arises, in part, from turbines redistributing heat by mixing the boundary layer. Modeled diurnal and seasonal temperature differences are roughly consistent with recent observations of warming at wind farms, reflecting a coherent mechanistic understanding for how wind turbines alter climate. The warming effect is: small compared with projections of 21st century warming, approximately equivalent to the reduced warming achieved by decarbonizing global electricity generation, and large compared with the reduced warming achieved by decarbonizing US electricity with wind. For the same generation rate, the climatic impacts from solar photovoltaic systems are about ten times smaller than wind systems. Wind’s overall environmental impacts are surely less than fossil energy. Yet, as the energy system is decarbonized, decisions between wind and solar should be informed by estimates of their climate impacts.

Peter J. Irvine, David W. Keith, and John Moore. 7/27/2018. “Brief communication: Understanding solar geoengineering's potential to limit sea level rise requires attention from cryosphere experts.” The Cryosphere, 12, Pp. 2501-2513. Publisher's VersionAbstract
Stratospheric aerosol geoengineering, a form of solar geoengineering, is a proposal to add a reflective layer of aerosol to the stratosphere to reduce net radiative forcing and so to reduce the risks of climate change. The efficacy of solar geoengineering at reducing changes to the cryosphere is uncertain; solar geoengineering could reduce temperatures and so slow melt, but its ability to reverse ice sheet collapse once initiated may be limited. Here we review the literature on solar geoengineering and the cryosphere and identify the key uncertainties that research could address. Solar geoengineering may be more effective at reducing surface melt than a reduction in greenhouse forcing that produces the same global-average temperature response. Studies of natural analogues and model simulations support this conclusion. However, changes below the surfaces of the ocean and ice sheets may strongly limit the potential of solar geoengineering to reduce the retreat of marine glaciers. High-quality process model studies may illuminate these issues. Solar geoengineering is a contentious emerging issue in climate policy and it is critical that the potential, limits, and risks of these proposals are made clear for policy makers.
Joshua B. Horton, Jesse L. Reynolds, Holly Jean Buck, Daniel Callies, Stefan Schäfer, David W. Keith, and Steve Rayner. 6/28/2018. “Solar Geoengineering and Democracy.” Global Environmental Politics, Pp. 5-24. Publisher's VersionAbstract
Some scientists suggest that it might be possible to reflect a portion of incoming sunlight back into space to reduce climate change and its impacts. Others argue that such solar radiation management (SRM) geoengineering is inherently incompatible with democracy. In this article, we reject this incompatibility argument. First, we counterargue that technologies such as SRM lack innate political characteristics and predetermined social effects, and that democracy need not be deliberative to serve as a standard for governance. We then rebut each of the argument’s core claims, countering that (1) democratic institutions are sufficiently resilient to manage SRM, (2) opting out of governance decisions is not a fundamental democratic right, (3) SRM may not require an undue degree of technocracy, and (4) its implementation may not concentrate power and promote authoritarianism. Although we reject the incompatibility argument, we do not argue that SRM is necessarily, or even likely to be, democratic in practice.
Matthias Honegger, Steffen Munch, Annette Hirsch, Christoph Beuttler, Thomas Peter, Wil Burns, Oliver Genden, Timo Goeschl, Daniel Gregorowius, David Keith, Markus Lederer, Axel Michaelowa, Janos Pasztor, Stefan Schafer, Sonia Seneviratne, Andrea Stenke, Anthony Patt, and Ivo Wallimann-Helmer. 5/2017. Climate change, negative emissions and solar radiation management: It is time for an open societal conversation. Risk-Dialogue Foundation St.Gallen for the Swiss Federal Office for the Environment.
David W. Keith, Geoffrey Holmes, David St. Angelo, and Kenton Heidel. 6/7/2018. “A Process for Capturing CO2 from the Atmosphere.” Joule. Publisher's VersionAbstract

Context & Scale
An industrial process for large-scale capture of atmospheric CO2 (DAC) serves two roles. First, as a source of CO2 for making carbon-neutral hydrocarbon fuels, enabling carbon-free energy to be converted into high-energy-density fuels. Solar fuels, for example, may be produced at high-insolation low-cost locations from DAC-CO2 and electrolytic hydrogen using gas-to-liquids technology enabling decarbonization of difficult-to-electrify sectors such as aviation. And second, DAC with CO2 sequestration allows carbon removal.

The feasibility of DAC has been disputed, in part, because publications have not provided sufficient engineering detail to allow independent evaluation of costs. We provide an engineering cost basis for a commercial DAC system for which all major components are either drawn from well-established commercial heritage or described in sufficient detail to allow assessment by third parties. This design reflects roughly 100 person-years of development by Carbon Engineering.

We describe a process for capturing CO2 from the atmosphere in an industrial plant. The design captures ∼1 Mt-CO2/year in a continuous process using an aqueous KOH sorbent coupled to a calcium caustic recovery loop. We describe the design rationale, summarize performance of the major unit operations, and provide a capital cost breakdown developed with an independent consulting engineering firm. We report results from a pilot plant that provides data on performance of the major unit operations. We summarize the energy and material balance computed using an Aspen process simulation. When CO2 is delivered at 15 MPa, the design requires either 8.81 GJ of natural gas, or 5.25 GJ of gas and 366 kWhr of electricity, per ton of CO2 captured. Depending on financial assumptions, energy costs, and the specific choice of inputs and outputs, the levelized cost per ton CO2 captured from the atmosphere ranges from 94 to 232 $/t-CO2.

Sebastian D. Eastham, Debra K. Weisenstein, David W. Keith, and Steven R. H. Barrett. 5/25/2018. “Quantifying the impact of sulfate geoengineering on mortality from air quality and UV-B exposure.” Atmospheric Environment. Publisher's VersionAbstract
Sulfate geoengineering is a proposed method to partially counteract the global radiative forcing from accumulated greenhouse gases, potentially mitigating some impacts of climate change. While likely to be effective in slowing increases in average temperatures and extreme precipitation, there are known side-effects and potential unintended consequences which have not been quantified. One such consequence is the direct human health impact. Given the significant uncertainties, we take a sensitivity approach to explore the mechanisms and range of potential impacts. Using a chemistry-transport model, we quantify the steady-state response of three public health risks to 1 °C global mean surface cooling. We separate impacts into those which are “radiative forcing-driven”, associated with climate change “reversal” through modification of global radiative forcing, and those “direct impacts” associated uniquely with using sulfate geoengineering to achieve this. We find that the direct (non-radiative forcing driven) impact is a decrease in global mortality of ∼13,000 annually. Here the benefits of reduced ozone exposure exceed increases in mortality due to UV and particulate matter, as each unit of injected sulfur incurs 1/25th the particulate matter exposure of a unit of sulfur emitted from surface sources. This reduction is exceeded by radiative forcing-driven health impacts resulting from using sulfate geoengineering to offset 1 °C of surface temperature rise. Increased particulate matter formation at these lower temperatures results in ∼39,000 mortalities which would have been avoided at higher temperatures. As such we estimate that sulfate geoengineering in 2040 would cause ∼26,000 (95% interval: −30,000 to +79,000) early deaths annually relative to the same year without geoengineering, largely due to the loss of health benefits associated with CO2-induced warming. These results account only for impacts due to changes in air quality and UV-B flux. They do not account for non-mortality impacts or changes in atmospheric dynamics, and must be considered in the wider context of other climate change impacts such as heatwave frequency and sea level rise.
Jordan P. Smith, John Dykema, and David Keith. 4/2/2018. “Production of Sulfates Onboard an Aircraft: Implications for the Cost and Feasibility of Stratospheric Solar Geoengineering.” Earth and Space Science. Publisher's VersionAbstract
Injection of sulfate aerosols into the stratosphere, a form of solar geoengineering, has been proposed as a means to reduce some climatic changes by decreasing net anthropogenic radiative forcing. The cost and technical feasibility of forming aerosols with the appropriate size distribution are uncertain. We examine the possibility of producing the relevant sulfur species, SOor SO3, by in situ conversion fromelemental sulfur onboard an aircraft. We provide afirst-order engineering analysis of an open cycle chemicalplant for in situ sulfur to sulfate conversion using a Brayton cycle combustor and a catalytic converter. We find that such a plant could have sufficiently low mass that the overall requirement for mass transport to the lower stratosphere may be reduced by roughly a factor of 2. All else equal, this suggests that—for a given radiative forcing—the cost of delivering sulfate aerosols may be nearly halved. Beyond reducing cost, the use of elemental sulfur reduces operational health and safety risks and should therefore reduce environmental side effects associated with delivery. Reduction in cost is not necessarily beneficial as it reduces practical barriers to deployment, increasing the urgency of questions concerningthe efficacy, risks, and governance of solar geoengineering.