Joule

2018
Lee Miller and David Keith. 10/4/2018. “Climatic Impacts of Wind Power.” Joule, 2. Publisher's VersionAbstract

We find that generating today’s US electricity demand (0.5 TWe) with wind power would warm Continental US surface temperatures by 0.24C. Warming arises, in part, from turbines redistributing heat by mixing the boundary layer. Modeled diurnal and seasonal temperature differences are roughly consistent with recent observations of warming at wind farms, reflecting a coherent mechanistic understanding for how wind turbines alter climate. The warming effect is: small compared with projections of 21st century warming, approximately equivalent to the reduced warming achieved by decarbonizing global electricity generation, and large compared with the reduced warming achieved by decarbonizing US electricity with wind. For the same generation rate, the climatic impacts from solar photovoltaic systems are about ten times smaller than wind systems. Wind’s overall environmental impacts are surely less than fossil energy. Yet, as the energy system is decarbonized, decisions between wind and solar should be informed by estimates of their climate impacts.

climatic_impacts_of_wind_power.pdf
David W. Keith, Geoffrey Holmes, David St. Angelo, and Kenton Heidel. 6/7/2018. “A Process for Capturing CO2 from the Atmosphere.” Joule. Publisher's VersionAbstract

Context & Scale
An industrial process for large-scale capture of atmospheric CO2 (DAC) serves two roles. First, as a source of CO2 for making carbon-neutral hydrocarbon fuels, enabling carbon-free energy to be converted into high-energy-density fuels. Solar fuels, for example, may be produced at high-insolation low-cost locations from DAC-CO2 and electrolytic hydrogen using gas-to-liquids technology enabling decarbonization of difficult-to-electrify sectors such as aviation. And second, DAC with CO2 sequestration allows carbon removal.

The feasibility of DAC has been disputed, in part, because publications have not provided sufficient engineering detail to allow independent evaluation of costs. We provide an engineering cost basis for a commercial DAC system for which all major components are either drawn from well-established commercial heritage or described in sufficient detail to allow assessment by third parties. This design reflects roughly 100 person-years of development by Carbon Engineering.

Summary
We describe a process for capturing CO2 from the atmosphere in an industrial plant. The design captures ∼1 Mt-CO2/year in a continuous process using an aqueous KOH sorbent coupled to a calcium caustic recovery loop. We describe the design rationale, summarize performance of the major unit operations, and provide a capital cost breakdown developed with an independent consulting engineering firm. We report results from a pilot plant that provides data on performance of the major unit operations. We summarize the energy and material balance computed using an Aspen process simulation. When CO2 is delivered at 15 MPa, the design requires either 8.81 GJ of natural gas, or 5.25 GJ of gas and 366 kWhr of electricity, per ton of CO2 captured. Depending on financial assumptions, energy costs, and the specific choice of inputs and outputs, the levelized cost per ton CO2 captured from the atmosphere ranges from 94 to 232 $/t-CO2.

keith_et_al._-_2018_-_a_process_for_capturing_co2_from_the_atmosphere.pdf